APOTHECARY CABINET - TIM HOLTZ IDEA-OLOGY HALLOWEEN 2023

 



Hello everyone!  I had planned to get this tutorial done a lot sooner, but I've been super busy this month.  Better late than never, I guess!  I'm sure most of you have done all your Halloween crafting, or maybe you're like me, creating until the last minute or even after!  


                               I might not explain everything in great detail, but at least I have photos to help you!


The bottom of my cabinet is made up of two large vignette boxes glued together with Distress Collage Medium. 


The top portion of the cabinet is three smaller boxes (about 3 1/4 x 4 1/2") glued together. The two sections will be glued together after I drilled the holes for the tiny lights. 


Cover the inside of the boxes with Halloween Backdrops papers. Figure out where you want your Tiny Lights to go, and drill the holes. I started in the bottom corner, made my way across the other side and up through the top to the bottom of the top three boxes. My string of lights goes across these top three also. 



Keep in mind when stringing your lights, that there are three shelves to be put in the upper cabinets.


These shelves are just made with corrugated cardboard cut to fit the depth and width of the boxes.  They are covered with wood looking paper from the Backdrops package.  They are glued in with Distress Collage Medium after I've made the Matchbox drawers for each end box, which they will rest on top of.




I've cut each Matchbox in half.  There are three sections.  These are all painted with Distress Paint.  I started with a dark brown, and then dry brushed a grey and beige paint on top.  For the drawer, I used some old Tim Holtz Remanent Rubs for the numbers and large Fasteners for the knobs.  There's a close up photo further on.



Usually I make these little books in my spare time, so handy to have them done and ready to use!  These book pieces are in the Ephemera pack.  I cut small pages from an old book.  I usually cut it wide enough to fold in half, add a few together, then staple them with my Tim Holtz Tiny Attacher. Depending how thick you want your book, glue a few sections together and then to your book cover.  Ink the edges.



For my book ends, I've added some Glow Grit Paste and Skeleton Head Stickers, book clippings to the two gravestones in the Graveyard pkg.  I've also rolled up some scrap paper and ephemera, distressed, and wrapped a book clipping around them.


For my Skulls, I've applied Crushed Olive Distress Glaze, then highlighted with Gilded Foundry Wax.


I've broken a few bones in half, inked and glued them into a drawer.  The Mummy Cloth under the skull is saturated with Glow Grit Paste.  I have a photo further down. I've also kept the lights quite loose, so they can be adjusted as I'm filling up my shelves.


All my vials have been painted first with Distress Collage Medium (this helps prepare the glass surface), then Rock Candy Crackle Paint applied after the medium was dry.   Labels and book clippings were also applied.  Brown Distress Crayon  was applied in the cracks.  I've painted the insides with paint and added in some Glow Grit Paste in some of them.  Keep in mind that there will be a window in front, so make your bottles a bit brighter, so they show up better.


Two windows from the Baseboard layers pkg. are used for my cabinet.  The Shattered Window pieces are adhered behind.  For the top centre window, an extra baseboard piece was added.  I've added a Skull Tag to the middle with Glow Grit Paste.


To make the Shattered Glass look dusty or dirty, I've rubbed a very small amount of Collage Medium with my finger on them.  If you want any section left clear, you can rub it off with a damp cloth or finger as I have done in the middle of the one pane.  I've adhered the windows to the cabinet at the very end of my project.  All my shelves were finished and the tiny lights were placed first.


For the middle window, I've used one of the Etcetera Facades (2nd from the left), which fit perfectly behind the window and was enough for the extra baseboard arch piece to fit on.


Here, you can see the Facade from the back.  I've just painted the back with Distress paint.


I've used two owls from the Ephemera pkg. and adhered them both on top of a glass bubble with Glow Grit Paste.  The tall one is adhered with Glow Paste on top of a piece of foam, which was painted and Grit paste added.  The shorter one is adhered onto a small round ephemera label.


These two owls are placed in the bottom shelf. I've kept them close to the edge, as a window will be in front, and they will show up better.  Another larger Owl label is placed right on the middle of where the two boxes join.  I've cut some of the background away at the top and just left a narrow piece where the wood edges are.  There's a photo later on, that it shows up in.


A mini Display Dome has some Ephemera and acrylic bats inside.  Glow Grit Paste on the bottom. The glass also has some Collage Medium on it to dull the glass.  There's also Sticker bats adhered to the tiny lights.


On this shelf, I have used the framed portrait from the Sticker Book, Drippy Candles (with added drips from my glue gun) on the candlesticks from the Manor Pkg.  A spider adornment, and a wizard's staff or wand (not sure what you would call it, lol).  It was made with a glass bubble(tinted with alcohol ink) and a cotton ball, I have explained further down with my twisted twigs.


These Trick or Treat Pumpkins were my favourite from this release!  This cat one is filled with twisted branches and whispy Glowing Cotton (explained below), Leaf adornment was tinted with Foundry Wax and paint.  Another Mini Display Dome, with bones inside, a bit of fabric wrapped around the bottom, and another spider adornment and mummy cloth. 


I created these twisted twigs with a Cotton Ball, Collage Medium and Mica Stains.  Just tear off a piece from your cotton ball, saturate with Collage Medium and twist it!  Easy!  After it has dried, then colour with Mica Stain or anything you choose.


Here's some other ones, I created for another project.  My mummy cloth used in this project also had Collage Medium applied, then Glow Grit Paste.  Just clip parts of the cloth so it's ragged, it will still be pliable after it has dried.  I've also unrolled part of the cotton ball and applied my Glow Grit Paste to this too.  Makes for some interesting shapes!  For the Wizard wand, I just twisted the staff like I did with the twigs, but thicker, especially at the top, made an indentation, and glued a glass bauble on the end after I coloured it.


In this section, I've got another vial, with a label, a bone (broken in half) and mummy cloth with Glow Grit Paste.  Here's the close up of the drawers after they were painted, and remnant rubs and fasteners added.  Inside the open drawer, I have mummy cloth, with some Confectionary candies.


A lock and key from the Gothic Gates was added with a small chain, to the middle window pane (or I should say glass cupboard doors!) This was  distressed with paint and Foundry Wax too.


Here's another close up of these two top shelves.  Once you have your shelves all filled and glued down, the shattered glass frames can be adhered on to the front middle.


Here you can see the label with the owl.  I've cut some of the top part surrounding the owl off, except that middle strip. It covers the box edges.  I did this, as I wanted more to show up behind the owl.  A word Plaque was added at the bottom of this frame.


The back and sides of my cabinet was covered with Halloween Backdrops paper.  One continuous sheet of paper across the top part and another across the bottom, to cover the boxes.  I've also added some Distress Opaque Crackle paste in random areas.  This was coloured with Distress Crayon and Ink.  I made a little pocket for my battery pack from a piece of Halloween Ephemera.




Here's a few photos of the shelves lit up.  The Glow Grit Paste adds in an extra green glow to the lights.  I've used Green Tiny Lights here. 








Here's another look at my finished Apothecary Cabinet!


Thanks so much for visiting me here, and I hope you have had a great Halloween creating and making  season!  

Until next time,

Jan

Supply List

TH94325 Shattered Windows
TH94345 Mini Display Domes
TH94342 Spiders and Branches Adornments
TH94340 The Manor (candlesticks)
TH94341 Word Plaques &Tags
Th94339 Skulls & Bones
TH4338 Trick or Treat (pumpkin)
TH94337 Graveyard
TH94336 Halloween Confections
TH94335 Halloween Sticker Book
TH94333 Halloween Layers & Paper dolls
TH94332 Halloween Ephemera Pack
TH4334 Baseboards & Transparencies
TH94331 Halloween Backdrops
TH94343 Gothic Gates (key & lock)
TH94155 Mummy Cloth
TH93201 Corked Tiny Vials
TH92899 Corked Vials
TH94050 Match Boxes
TH94314 Large Fasteners
TH94157 Halloween Tiny Lights
TH93279 Vignette Boxes
ETC016 Etcetera Facades
TH94260 Drippy Candles
TH94180 Glass Bubbles
Ranger Ink Supplies - Distress Inks, Mica Stains, Crayons, Collage Medium, Grit Glow Paste, Paint, Foundry Wax, Alcohol Ink, Opaque Crackle Paste

3

HALLOWEEN GLOBE - TIM HOLTZ IDEA-OLOGY HALLOWEEN 2023

 Hello everyone!  I can’t believe that September is over, it went by way too fast!  I’m sharing my first Halloween project created for the Tim Holtz Idea-ology Halloween live on his YouTube channel.  If you missed the live or you’re looking for more Halloween inspiration, visit Tim’s blog here. So many fantastic projects!



I wanted to use this new Display Globe as soon as I saw it!  But I do like to a vignette with more space to tell my story, so I decided to make a book for my base. Ever since I saw Tami Bastiaans’ Halloween book (tutorial here) I’ve been wanting to make one. I also wanted the feeling of a crystal ball and of course, you can’t have a Halloween make without tiny lights!


Here’s another look at my make without the lights on.  


                         A closer look without the glass dome. Now, onto the details how I created this!


First I’ve drilled a hole in my wood vignette box where the centre of my globe is going to be. The tiny lights will come through this so the battery pack is underneath.  Here, you can see I've started to adhere my thin strips of chipboard to the box edges, forming a book shape.



I’ve also drilled a hole in the cork base for my tiny lights to come through. They are inside the cauldron. 



The cork bottom is painted with Black Soot paint as shown.  Using a piece from the sticker book (it wasn’t quite enough, so I added a piece from the ephemera pack that was similar), I’ve covered around the cork edge. Make slits at the top to slightly curve the piece.  Crypt Halloween Grit paste was added randomly on the base.  


I didn’t take a lot of photos of my book construction, but Tami has lots of step by step photos here.
For all the ridges on the book edges and the curve of the spine, glue strips of chipboard to your base. The three edges of the box/book are glued at the ends an the top piece(closest to the spine) is on top of the box. I’ve adhered white printer paper over everything to soften the edges. 


To get the look of book pages, I applied Distress Opaque Texture Paste, then a Tim Holtz wire Craft Scratcher(TTS00373) or if you haven’t that, something like a comb or even take an old gift card and cut one end into teeth. You just need something to create the lines. After this dried I lightly inked the pages with brown ink and a Blending Brush. 


The top of the book is covered with a paper from the Backdrops package. It is cut about 1/4” larger than the book front, so it covers just around the book edge. 


I’ve painted the top and bottom of the spine, edges with Black Soot paint. 


With the leftover paper from the cover, I cut narrow pieces to cover the edges on the three bottom edges of the book. The side where the spine is won’t need one as you will cover it with spine Kraft Stock.


The bottom pieces just come up to edge of the book pages. 


My spine is a piece of Black Kraftstock that was embossed with the 3D Cracked Leather Embossing folder. It was sanded to give a worn look. Ink lightly with a brown Distress Ink. The “wicked” is stenciled with the Halloween Script (THS063) stencil, Distress Crackle Opaque Texture Paste, apply gold embossing powder and let it air dry. Once it’s dried, heat the embossing power. This is then cut so about an inch comes to the front and leave enough to tuck in the ends. Lightly sand the ends so the built up pieces at the ends are accented. 


The candle is glued to a candlestick with Collage Medium.  I added in drips down the stand with a hot glue gun and then painted with Distress paint. Crypt Grit Paste was added to the cauldron. Backdrops paper added to the top of the cork base.  


Glue the cauldron to the cork bottom.  I’ve also dabbed a bit of orange Distress paint on the grit paste. 


String the Tiny lights from the underneath the book into the cauldron. Choose how much of the strand you want to use and cut off  from the end if you’re not using the whole strand.  I make a circle of the lights in the bottom and a single strand down the side. Glue your Display Globe cork bottom to the book with Distress Collage Medium.



The glass bubbles were coloured with Twilight Alcohol ink. I thought I would try to see if Distress Collage Medium would take some of the shine off, I wanted them a little duller. It worked exactly how I wanted but the colour was slightly altered, a bit pinky orange in there(which I thought was great!). I just put a very tiny amount on my finger and lightly rubbed it on each bubble and let them dry. I glued the small piece of orange coloured (distress orange spray stain) Mummy cloth around the inside edge of the cauldron and down the side(covering the tiny light strand). The candlestick was added in after the bubbles were dry. Make sure the glass dome fits over everything.


The little book is made from a book cover from the ephemera Halloween pack and paper from an old book, then distressed and inked. All the titles on my books are from the Book Clippings in the Halloween Sticker Book. An Idea-ology Toadstool and a bat from the ephemera pack were added with black string tied around them and the book. 


Next to the globe, I have a skull, bones, broom, books, framed photo and vial with a metal tag. The photo is from the sticker book. The frame is in the same package as the candlesticks. The skull & bones are packaged together. The broom is packaged with the cauldron and gravestones.  For the vial, I added a drop or two of orange alcohol inside and swirled it around. The outside was coated with Collage Medium and air dried. I always put a layer of this medium on glass, metal, anything non-porous, first before I apply paint, helps the paint adhere. Once the vial was dry, I applied Transparent Crackle Paste. A bit of orange paint in the cracks and a label from the book clipping stickers, and a metal 13 tag completed it. 


Gilded Foundry Wax was added to the raised areas of my frame and then a touch of Crypt Grit Paste, highlighted with a touch of orange distress paint. To get the frame to stand up, I hot glued a book standing up, then the frame glued behind it, slightly to the edge of the frame.  Another book is glued right behind the frame, sandwiching the frame between the two books. Add in some mummy cloth  and moss to finish off the vignette. With all the embellishments, ephemera, and  metal bits I always ink, stain, paint, or sand to give them all the vintage distressed look.


For the glass globe, I cut a thin strip(about 1/4") of rusty metal looking paper from the Backdrops paper pack, inked and glued that around the bottom edge.  Hardware heads that were coloured slightly with purple paint and Gilded Foundry Wax, were added.  Your Halloween Display Globe is completed!

Hope you enjoyed this tutorial and it inspires you to create your own Halloween Display Globe!  Make sure you check out all the other makers, their projects are amazing!  Thanks for visiting here!

Until next time,

 Jan


Materials Used:

TH94344 Display Globe
   TH94340 The Manor 
TH94341 Halloween Word Plaques and Tags
TH94337 Graveyard
TH094332 Halloween Ephemera Pack
TH94339 Halloween Skulls & Bones
TH94335 Halloween Sticker Book
TH94331 Halloween Backdrops
TH93279 Vignette Boxes
 th94082 Toadstools
TH92899 Corked Vials
TH94260 Drippy Candles
TH94180 Glass Bubbles
TH93788 Hardware Heads
TH94155 Mummy Cloth
TH94157 Halloween Tiny Lights
TH94145 Black Kraft Stock stack
TAB25511 Twilight Alcohol Ink
THS063Halloween Script Stencil
Sizzix 665766 3D Cracked Leather Texture Fade Embossing Folder
tda79309 Distress Collage Matte Medium
tda71297 Distress Opaque Texture Medium
tda71303 Distress Opaque Crackle Paste
tshk81081 Distress Crypt Halloween Grit Paste 
TDAK80435 Distress Foundry Wax Kit #1 Gilded/Mined
Various Distress Inks and Sprays
Antique Gold Embossing Powder
Chipboard pieces for book
Hot Glue for candle drips
craft moss




0
Back to Top