APOTHECARY CABINET - TIM HOLTZ IDEA-OLOGY HALLOWEEN 2023

 

Hello everyone!  I had planned to get this tutorial done a lot sooner, but I've been super busy this month.  Better late than never, I guess!  I'm sure most of you have done all your Halloween crafting, or maybe you're like me, creating until the last minute or even after!  

                               I might not explain everything in great detail, but at least I have photos to help you!

The bottom of my cabinet is made up of two large vignette boxes glued together with Distress Collage Medium. 

The top portion of the cabinet is three smaller boxes (about 3 1/4 x 4 1/2") glued together. The two sections will be glued together after I drilled the holes for the tiny lights. 

Cover the inside of the boxes with Halloween Backdrops papers. Figure out where you want your Tiny Lights to go, and drill the holes. I started in the bottom corner, made my way across the other side and up through the top to the bottom of the top three boxes. My string of lights goes across these top three also. 

Keep in mind when stringing your lights, that there are three shelves to be put in the upper cabinets.

These shelves are just made with corrugated cardboard cut to fit the depth and width of the boxes.  They are covered with wood looking paper from the Backdrops package.  They are glued in with Distress Collage Medium after I've made the Matchbox drawers for each end box, which they will rest on top of.

I've cut each Matchbox in half.  There are three sections.  These are all painted with Distress Paint.  I started with a dark brown, and then dry brushed a grey and beige paint on top.  For the drawer, I used some old Tim Holtz Remanent Rubs for the numbers and large Fasteners for the knobs.  There's a close up photo further on.

Usually I make these little books in my spare time, so handy to have them done and ready to use!  These book pieces are in the Ephemera pack.  I cut small pages from an old book.  I usually cut it wide enough to fold in half, add a few together, then staple them with my Tim Holtz Tiny Attacher. Depending how thick you want your book, glue a few sections together and then to your book cover.  Ink the edges.

For my book ends, I've added some Glow Grit Paste and Skeleton Head Stickers, book clippings to the two gravestones in the Graveyard pkg.  I've also rolled up some scrap paper and ephemera, distressed, and wrapped a book clipping around them.

For my Skulls, I've applied Crushed Olive Distress Glaze, then highlighted with Gilded Foundry Wax.

I've broken a few bones in half, inked and glued them into a drawer.  The Mummy Cloth under the skull is saturated with Glow Grit Paste.  I have a photo further down. I've also kept the lights quite loose, so they can be adjusted as I'm filling up my shelves.

All my vials have been painted first with Distress Collage Medium (this helps prepare the glass surface), then Rock Candy Crackle Paint applied after the medium was dry.   Labels and book clippings were also applied.  Brown Distress Crayon  was applied in the cracks.  I've painted the insides with paint and added in some Glow Grit Paste in some of them.  Keep in mind that there will be a window in front, so make your bottles a bit brighter, so they show up better.

Two windows from the Baseboard layers pkg. are used for my cabinet.  The Shattered Window pieces are adhered behind.  For the top centre window, an extra baseboard piece was added.  I've added a Skull Tag to the middle with Glow Grit Paste.

To make the Shattered Glass look dusty or dirty, I've rubbed a very small amount of Collage Medium with my finger on them.  If you want any section left clear, you can rub it off with a damp cloth or finger as I have done in the middle of the one pane.  I've adhered the windows to the cabinet at the very end of my project.  All my shelves were finished and the tiny lights were placed first.

For the middle window, I've used one of the Etcetera Facades (2nd from the left), which fit perfectly behind the window and was enough for the extra baseboard arch piece to fit on.

Here, you can see the Facade from the back.  I've just painted the back with Distress paint.

I've used two owls from the Ephemera pkg. and adhered them both on top of a glass bubble with Glow Grit Paste.  The tall one is adhered with Glow Paste on top of a piece of foam, which was painted and Grit paste added.  The shorter one is adhered onto a small round ephemera label.

These two owls are placed in the bottom shelf. I've kept them close to the edge, as a window will be in front, and they will show up better.  Another larger Owl label is placed right on the middle of where the two boxes join.  I've cut some of the background away at the top and just left a narrow piece where the wood edges are.  There's a photo later on, that it shows up in.

A mini Display Dome has some Ephemera and acrylic bats inside.  Glow Grit Paste on the bottom. The glass also has some Collage Medium on it to dull the glass.  There's also Sticker bats adhered to the tiny lights.

On this shelf, I have used the framed portrait from the Sticker Book, Drippy Candles (with added drips from my glue gun) on the candlesticks from the Manor Pkg.  A spider adornment, and a wizard's staff or wand (not sure what you would call it, lol).  It was made with a glass bubble(tinted with alcohol ink) and a cotton ball, I have explained further down with my twisted twigs.

These Trick or Treat Pumpkins were my favourite from this release!  This cat one is filled with twisted branches and whispy Glowing Cotton (explained below), Leaf adornment was tinted with Foundry Wax and paint.  Another Mini Display Dome, with bones inside, a bit of fabric wrapped around the bottom, and another spider adornment and mummy cloth. 

I created these twisted twigs with a Cotton Ball, Collage Medium and Mica Stains.  Just tear off a piece from your cotton ball, saturate with Collage Medium and twist it!  Easy!  After it has dried, then colour with Mica Stain or anything you choose.

Here's some other ones, I created for another project.  My mummy cloth used in this project also had Collage Medium applied, then Glow Grit Paste.  Just clip parts of the cloth so it's ragged, it will still be pliable after it has dried.  I've also unrolled part of the cotton ball and applied my Glow Grit Paste to this too.  Makes for some interesting shapes!  For the Wizard wand, I just twisted the staff like I did with the twigs, but thicker, especially at the top, made an indentation, and glued a glass bauble on the end after I coloured it.

In this section, I've got another vial, with a label, a bone (broken in half) and mummy cloth with Glow Grit Paste.  Here's the close up of the drawers after they were painted, and remnant rubs and fasteners added.  Inside the open drawer, I have mummy cloth, with some Confectionary candies.

A lock and key from the Gothic Gates was added with a small chain, to the middle window pane (or I should say glass cupboard doors!) This was  distressed with paint and Foundry Wax too.

Here's another close up of these two top shelves.  Once you have your shelves all filled and glued down, the shattered glass frames can be adhered on to the front middle.

Here you can see the label with the owl.  I've cut some of the top part surrounding the owl off, except that middle strip. It covers the box edges.  I did this, as I wanted more to show up behind the owl.  A word Plaque was added at the bottom of this frame.

The back and sides of my cabinet was covered with Halloween Backdrops paper.  One continuous sheet of paper across the top part and another across the bottom, to cover the boxes.  I've also added some Distress Opaque Crackle paste in random areas.  This was coloured with Distress Crayon and Ink.  I made a little pocket for my battery pack from a piece of Halloween Ephemera.

Here's a few photos of the shelves lit up.  The Glow Grit Paste adds in an extra green glow to the lights.  I've used Green Tiny Lights here. 

Here's another look at my finished Apothecary Cabinet!

Thanks so much for visiting me here, and I hope you have had a great Halloween creating and making  season!  

Until next time,

Jan

Supply List

TH94325 Shattered Windows

TH94345 Mini Display Domes

TH94342 Spiders and Branches Adornments

TH94340 The Manor (candlesticks)

TH94341 Word Plaques &Tags

Th94339 Skulls & Bones

TH4338 Trick or Treat (pumpkin)

TH94337 Graveyard

TH94336 Halloween Confections

TH94335 Halloween Sticker Book

TH94333 Halloween Layers & Paper dolls

TH94332 Halloween Ephemera Pack

TH4334 Baseboards & Transparencies

TH94331 Halloween Backdrops

TH94343 Gothic Gates (key & lock)

TH94155 Mummy Cloth

TH93201 Corked Tiny Vials

TH92899 Corked Vials

TH94050 Match Boxes

TH94314 Large Fasteners

TH94157 Halloween Tiny Lights

TH93279 Vignette Boxes

ETC016 Etcetera Facades

TH94260 Drippy Candles

TH94180 Glass Bubbles

Ranger Ink Supplies - Distress Inks, Mica Stains, Crayons, Collage Medium, Grit Glow Paste, Paint, Foundry Wax, Alcohol Ink, Opaque Crackle Paste

3

CHRISTMAS BANNER - SIMON SAYS STAMP STAMPtember 2023

Hello friends! Today is the much anticipated exclusive Tim Holtz STAMPtember YouTube live day!  I've created this Christmas Banner for the Simon Says Stamptember exclusive Tim Holtz set.

There is a limited supply of this set, which usually sells out fast!  

As an extra surprise, Simon Says Stamp also created this very limited amount of Die sets that coordinate with the stamp set.  These are sold separately!

When I decided to make a banner, I wasn't quite sure what I was going to create, so I started by stamping my main images on Ranger Ink Watercolour Cardstock (flat side) that had been lightly tinted with Distress  Oxides Lost Shadow and Antique Linen.  For a few extra dots, Lost Shadow ink sprayed with water on my mat, and the paper dipped on to my ink splotches.  I left enough room  to die-cut circles around each image.  I've used Sizzix Stitched Circles 662229.  I decided later to tear/snip off the smooth edge, as I wanted the piece underneath to show more.  Ink the edges.

Next, I stamped the same images again, this time on patterned paper (Tim Holtz Backdrops).  I usually save those little leftover pieces, they come in handy! I've also used smaller ephemera or the journal cards as the pattern's are smaller.  I cut out some of the larger stamped parts and glued these in the same places on the watercolour paper images.  You don't have to cut out stamped lines that stick out, they will show up on your main stamped image.

Before glueing on these pieces, do any inking or this Santa one, I applied the Sparkle Texture Paste to my Santa Bag (with a brush).  I also took a brown or black felt pen and went along the edges carefully to removed the white edges.  On the parts of your stamped image that aren't covered with paper, colour with ink, crayons, watercolours, or glitter, whatever you want!

For my main banner pieces, I die-cut these shapes from  a discontinued Sizzix Framelets Plus Die set (660836).  It's a huge set made for larger machines, but I use the smaller dies.  If you don't have a banner die set, this shape is easy to cut out with a trimmer or craft knife. I've cut out a black cardstock mat slightly larger than my patterned paper and machine stitched the two together.  I love banners that have lots of layers, they just seem to look better to me.  So I just kept adding more layers, lol!

Forgot to take a photo earlier, but this embossed layer is a slightly larger size and is Kraft Heavystock embossed with the 3D Woodgrain Texture Fade Embossing Folder (555297).  I inked the folder with Ground Espresso Archival ink before I inserted my paper.  Ink the edges after embossing.  Then adhere your matted patterned paper layer on top of this.

And because I still love this discontinued Bigz Tree Ring Die and Embossing Set (662429), I added this next.  I die-cut black chipboard, then Tim Holtz Black cardstock, which was embossed then lightly sanded.  Glue the two together.  Your stamped images on the circles are adhered on top of this.  I've added some dots and dashes of Glossy Accents and Rock Candy Glitter on my stamped images and circles for extra Christmasy goodness.  If you don't have any of these dies, check your stash for any larger shape dies you have, I'm sure you will find something you can use!

Now I had to come up with how am I going to connect these altogether, there are a lot o different ideas out there.  I decided to add a piece of dark green cardstock (another layer!)  but cut this piece longer so the top folds over about 1/2 inch and a fabric strip (I've used a piece of Tim Holtz Flannel Etcetera fabric torn in a 1/2" strip) goes under it and across each banner.  I left enough to tie a knot in-between each banner piece, connecting them.

This trim piece is die-cut from Tim Holtz Sizzix Decorative Trims Thinlits set 665435 and Backdrops Patterned paper.  I applied stars with the included stencil and the Distress Glow Paste.  I also added Glow Paste with a palette knife along the edge.  Distress Rock Candy Glitter was applied immediately while the paste was wet, and I let it air dry.  Some glittery glow at night!  Once these pieces were dry, ink the edges.

These trim pieces are adhered on top of the folded over piece to hide any fabric poking out and I used dimensional pop dots so it stands out.  I've tied some extra ribbon and string loosely to hanging from each banner.

I've also added in small embellishments, some are stamped with the small included stamps (sentiments, mittens, holly, etc.)  Some of these are die-cut out with various small dies - Sizzix Collector Set 665926, Specimen set 665930, Postale set 665927 and Vintage Labels set 665929 are full of lots of little tags, labels, etc. Idea-ology metal embellishments are also added.  A close up of each banner is below.

 

Thanks so much for visiting me here!  I unfortunately received my package too late to send my make to Tim for the live, and  I was really pressed for time to get this done!  If I've missed anything that I didn't include here, let me know!    Hope those of you who wanted this set, managed to order it!  Happy stamping!

I am trying to get my Halloween tutorials done while it's still the making season, sorry to those of you waiting.  I've been dealing with sciatica since the summer, it's getting a lot better but sitting at the computer seems to aggravate it and  has to be done a little at a time. 

Until next time,

Jan

1