CHRISTMAS DIVIDED DRAWER - TIM HOLTZ IDEA-OLOGY CHRISTMAS 2021

 Merry Christmas everyone! Today I am sharing the third project I created for the Tim Holtz Idea-ology 2021 YouTube reveal.  

I love making these little Christmas Vignettes, hopefully one day they will be a treasured keepsake for my family.  I have used one of my favourite vignette structures, the Divided Drawer th93793, for my project.

The Divided Drawer has 2 inner shelves, which are removable, and I have removed one so that the bottom has a larger space.  I've covered the inside with Christmas Backdrop papers th94181.  Instead of covering the front edges of the box with paper, I have randomly applied Distress Crackle Texture Paste tda71303.  Once this has dried, apply Distress Brown Crayon and rub with something damp to get it in the cracks.  I usually just use my finger, that I have swiped on a damp paper towel.

For the sides of my box, I have used the Christmas Pocket Cards th94190.  Love this package, there are 55 pieces all double sided, three different sizes (3 x 2, 3 x 6, & 3 x 4"), perfect for journaling, small areas, December Dailys,  and cards, plus most of them already look like you have collaged them.  I've distressed some, ripped the edges, or rolled up the edges with crackle paste underneath to give the box an old look.

After the crackle paste has dried, also age it with the Distress crayons.

 

I've covered the back of the box with this Christmas Backdrops paper.  I have a somewhat Christmas confectionery theme to the project, so I chose papers that related to that.

 Instead of adding legs to the bottom of my box, and wanting it to be a bit more secure while standing,  I made my own base slightly larger than the box.  I've taken a Baseboard Lace Frame th93786, aged it with Distress crayons, and then glued a small chipboard rectangle (approx. 4 x 2.5") which has been covered with this striped paper from the Christmas Worn Wallpaper pkg. th94182. I've added this extra layer to cover the hole in the frame. There are also a few Snippets Ephemera labels th94188 with a Christmas Remnant Rub,  and a Label Sticker Sentiment th94205 on the top and sides of the Drawer.

I then adhered this base to the bottom of the divided drawer. 

Spray your Woodland tree th94212 with your chosen colours.  I've taken the base off and clipped a bit off at the bottom.  Before doing anything inside the box, I've drilled my hole for the Christmas Tiny Lights th94106 that go on my tree.  I've drilled a couple of inches above the bottom corner and an inch in from the side, where the tree is going.  The tree is the only thing that I have lit up in this vignette.  You could always light up the top with another strand if you wanted.

For my tree base, I used one of the Christmas tin tops th94204.  I made two cuts on the sides across from each other with wire cutters, just enough to bend my tin.  Caution, though, this is metal and the cut edges can be very sharp.  I used pliers to bend the tin.  It looks pretty beat up as I sanded and used the Christmas Ranger's Ink Icicle Crackle (Holiday Texture set tsck78227), but that's what I wanted!  It doesn't have to be perfect, you really just see the front part.

With your lights pulled through the back hole, wrap them around your tree. For the Distress Mica Flakes TDR69140, you can either apply them to your tree before wrapping the lights or after.  If you want to do it after the lights are on your tree, leave about 4 inches of lights closer to battery end, so there's enough room to apply your mica (I just use Glossy Accents with my finger all around, then pour on the flakes, tap lightly to remove excess on a paper) outside the box.  Once the glue has dried, just tuck in the extra lights near the start of your strand.  I had a dense foam piece that I stuck my tree end into, narrow enough that the tin could be glued to it, and then the bottom and side of your box.  I've added a Christmas Quote Seal th94202, using a Picket Fence Distress Crayon to highlight the words. I've glued this in with a thick small foam piece, so it's standing up.

For the back of the bottom drawer I used this "December 24" piece from the Christmas Layers pkg. TH94185.   These layer pieces are a thicker coated cardstock, they sand and distress quite nicely.  I've a piece of the Mini Icicles th94206 to the top.  I'm sure you have noticed, I have applied  Distress Mica TDR69140 or Distress Clear Rock Candy TDR35879 to pretty much everything!  I've added it to the icicles here.  There are already two holes punched in the top, so I added some rings and hung the sign with two nails from the Vignette Hardware pkg. TH93668.  I think this set is being discontinued, which is sad as I use this a lot, there's the antique nails, eye screws, long screws, and hooks in it.  

Once you have all those pieces attached, next is your Santa (Christmas Layers TH94185).  This one also is made from the thicker coated cardstock.   Before adhering him to the box, I've added a jump ring with two Tiny Bells TH94201 and a Snowflake Adornment TH94200(these snowflakes are so beautiful!) on the ring.  I had a little Tim Holtz Clip Bail TH93292 (discontinued but it's just a small metal clasp that turns a charm into a pendant) but you could use a small ring, which I attached the jump ring  and then poked the clasp into the Santa's hand so it looks like he's holding this.  The snowflake and bells were also coated with Rock Candy Glitter.  Because my Santa isn't flat against anything, I adhered behind his feet to the bottom and just at the back edge of his sack to the side with a hot glue gun.  You can't see glue behind the sack, but to cover up the glue at his feet, just apply either Translucent Grit Paste TDA71730, Snowfall Grit Paste from the Holiday set TSCK78227, or even a thicker amount of Glossy Accents, and apply Distress Mica or Rock Candy Glitter while any of these are wet.  That's the beauty of grit paste, it can cover up lots of things, and look like it's part of your project.  I've also added it around the tin base, and most of the floor of my display box.  I've  added a book clipping (the eve before Christmas) to the bottom front edge of the box from the Christmas Sticker book TD94183.

Now for the small section at the top of the drawer.  There's some Christmas Ephemera TH94187 in the back(candy cane), the little sign (Joseph Merkel Baker) is from the Christmas Pocket Cards, just cut out from one of the papers, th94190 pkg.  The candy jar is the Snowglobe th94015, without the base and upside down.  Inside there's Glossy Accents with Rock Candy glitter and Mica applied while wet, then the Red & White Confections with a little added glitter inside. There's a small price sticker from the Ephemera pack on the outside.  I applied a larger amount of Translucent Grit Paste on the bottom of the shelf and stuck the Globe into it.  Add lots of Mica Flakes and another candy piece.  The little Candy Box is made just like previous ones made here for Halloween. A peppermint Ephemera piece was added on top and book clippings (from the sticker book) added to the side.  There's a little bag of peanut brittle on top of the box at the back.  Glossy accents applied on a piece of plastic, coloured with alcohol ink, then cut into tiny pieces.  Clear plastic wrapped around and tied at top, then the word brittle( cut out from paper piece).`

My chocolate Santa is the from the Christmas Salvaged Package TH93995.  The Santa figure was painted with thin coats of Ground Espresso Distress Paint.  I've dried the layers in-between, and did about three layers, to give it a matte chocolate look.  With plastic from packaging, I made it look like it was a bag, string closing the top. 

Again, to hide any glue or spaces at the bottom, I applied Grit paste (Translucent or Holiday set) then Mica Flakes.

                 Here's another look at my Christmas Divided Drawer.  I realized that when I looked at these photos, I left the front shelf blank on the front edge, and I was going to put another book clipping there!  Which I did when I got my drawer back.  I guess I was in such a hurry to get my projects done, I forgot!

Here's a photo of the tree with the tiny lights on.

Well, that's my last Tim Holtz 2021 project to share.  Hope I've inspired you to create something with all the Tim Holtz goodies you have acquired.  Even if you are running out of time, at least you will have inspiration and a stash for next year.  I always find that I am in the mood to create Christmas things, even after Christmas is over.  We have terrible winter weather in January to March here, so it's a good time to stay home and craft.

We had a winter storm here last night and this morning, so I didn't want to leave the house, which turned out great, so I could get this post done!  I still need to get a few Christmas cards finished, so if I'm not last minute, I will share.

The view from my kitchen window this afternoon, looks nice and Christmasy, but it's -18C with the windchill -25C!  

Merry Christmas and Happy Holidays!

       Thanks so much for visiting me here and all your kind comments, they are greatly appreciated!

Until next time,

Jan

1

THE APOTHECARY CABINET - TIM HOLTZ HALLOWEEN IDEA-OLOGY 2021 RELEASE

 Hello everyone! It's hard to believe that Halloween is almost here, I don't know where this month has gone.  Here's my second Halloween Idea-ology project that I had created for the YouTube reveal.

This is another project that became a lot bigger than what I had planned!  I've concentrated more on the front of my cabinet and have explained how the door was created.

I've used the new Ornate Metal Gates(TH94159) on the front of my Apothecary Cabinet. Of course they need to be locked up, there might be a few sinister potions and spell books in there.

Here's a photo of the cabinet opened, revealing it's contents.

  

Here's a look of the side and back.  I've made a small paper pocket for the Tiny Lights battery case to fit into.  Now, on to my tutorial, it is a rather long one.  

For my cabinet, I’ve covered the Vignette Divided Drawer (TH93793) inside and outside with Backdrops (TH94146)

The 'feet' of my cabinet are the skulls(TH94169) that have a hole drilled into the top of the head.  I hammered a nail from the inside of the cabinet through to the head (fill the hole with Distress Collage Medium first for extra strength).

The cabinet door is made from Sizzix's Mat Board 656492, but you can use chipboard.  I like this mat board as it's very lightweight yet still sturdy and I wanted to keep the door as light as possible especially because the Ornate Gates are a thicker metal.  The door piece was cut to fit the dimensions of the outside Divided Drawer. On the door piece, I traced around my gates to get an idea of placement and how big to cut out the opening.  You will want to leave room for the spinners(hinges) that make the gates swing open.

I decided because the gates were quite heavy and I didn't want the door to bend, I cut out an extra center piece, plus 2 extra small pieces for above and below the center piece. There's about 1/4" space in-between and this also looks like panels. The hole is cut out in the middle for both the main door and the center piece, so they match up. At some point, while you are working on the door front, if you choose, add some Halloween Distress Grit Paste to the gates, along with colour(paint or alcohol ink) to age them.  Set aside to dry.  

These pieces were also covered in Backdrops paper except for the door inside.  This was painted with Distress Paint.  Ink the edges.  

Now for the Metal Game Spinner (TH92717) hinges.  Lay your metal gates on the front where you would like them and mark where the little bars will connect with the spinner.  The top ones have a bit more room to play with, but you have to be pretty exact with the bottom ones.  Make a cut wide enough for the spinner to poke through with your craft knife.  The center of the spinners is a hole, which is what your gate posts are going to fit into.

On the backside, bend the end of the spinner down at the bottom and then up at the gate tops.

After making sure that your gates and spinners are connecting, reinforce the back of the spinners with Distress Collage medium.  I put quite a bit on and let it dry naturally to ensure there was no movement.

The Game Spinners at the front of the door piece and bent down at the bottom and up at the top, as shown in the photo.  Your gate can now swing open.  I've also added Distress Crackle Texture Paste(TDA71303) to the door and cabinet base.  This was coloured and aged with brown Distress Crayons.

Here's a closeup of how the gate bar fits into the game spinner at the top.

Here's another closeup of the bottom hinge game spinner and bar.

To stop the gates from swinging open, I've used the new Lock & Key Adornments (TH94162) latched to the gate with a Hook Clasp TH94133. These were grunged up with a bit of Halloween Distress Grave Texture Paste and paint.  A door knob was added to the edge which is a Hitch Fastener TH92731.  I've added another game spinner on the other side, the screw going through this to the hitch knob on the front of the door.  The game spinner is bent so it is used to keep the door closed.  The pointed end is bent over the bolt and the other end is bent 90 degrees.  There's another photo further down of the bottom of the door.

To attach the door to the cabinet I have used Tim Holtz Hinges TH93075.  These attach with brads.  I've poked a hole through the wood divided drawer and the door for the brads.   These hinges were also grunged up with grit paste and paint. 

To cover up the brad bent ends and secure them, I applied Distress Collage Medium quite thick, dry, then applied a bit of grit paste with some Hardware Heads TH93788 that were also painted a bit.  A piece of Halloween Ephemera TH94151 was adhered (also distressed and inked) with a portrait sticker from the Halloween Sticker book TH94148.  Also included were some Book Clippings from the sticker book.

You can see the game spinner behind the door knob(hitch fastener), where it is bent so it catches the edge of the cabinet to keep the door closed.  Ephemera was added under the cabinet opening also.  Also hardware heads covered the brads from the hinges.

Now for the inside of the cabinet, which I did not take any step by step photos.  Must have been a very late night!

This is the top shelf.  I started my Halloween Tiny Lights 94157 at the top here (the hole is drilled behind the moon).  I used just a few along the bottom and then pulled the strand behind the shelf to the one below.  The moon face is from the Halloween Layers TH94150.  This has been grunged up and also with a bit of Crackle Texture Paste on the edge.  A Halloween Quote Seal sits on top of the boxes, distress crayon was added in the recessed areas.  A Corked Vial Glass Bottle TH92899 is filled with Creepy Eyes TH94061 in Resin.  There's also a Tiny Vial Corked Glass Bottle filled with.  A rolled up piece of Ephemera is laying on its side.

My little boxes, explanation below, have the Halloween Snippets TH94152 glued on the ends.

I made the little boxes using the skinny house from the Paper Village Thinlits set 664741.  I cut two pieces per box. glued together like I was building a house, expect I bent the pointy ends in to look like a flap.  I also clipped the other end along the fold, just enough so they would fold closed also.  If you want a shorter box, just cut of a bit from the one end.  Perfect size for vignette and the Snippet Labels!  It's also a good way to use all those small scraps of paper that we never want to get rid of.

For the middle shelf, I have the Lantern TH94160, which has a bit of Distress Crypt Texture Paste and paint added to age it.  The tiny lights come down from above behind the rolled Ephemera papers, poking out behind the Candle Stand TH94166, then behind the books, into the Lantern and out again, down behind the shelf to the bottom shelf.  The Candle Stand has been grunged also with Texture Paste and paint.  A small Mini Flair button 94158 was adhered with Collage Medium, upside down so that the Alcohol Inked (purple) Glass Bubble TH94180 sits securely inside.  This was also adhered with Collage Medium and a bit of Texture paste added around the bottom.  My books were made with the Book Covers that are included in the Halloween Ephemera package TH94151.  I cut up old book pages to fit inside.  Halloween Snippets were added to the book covers.

The bottom shelf has more boxes made with the Tiny House Thinlits set.  Halloween Snippet Labels were added.  There's a Halloween Baseboard TH94153 in the back (the tiny lights come down behind it) which has been distressed.  The tiny lights come behind the candle and one is right behind the wick, then back down behind the book and Test Tubes TH94156.  This is where the tiny lights end.  The Test Tubes are filled with moss, the smallest Toadstool (TH94082) in one and bones TH93964 in the other.  The outsides were covered with Collage Medium to make them look aged.  Distress Crackle Paste was added lightly to the edges of the Divided Drawer, Distress Crayon added to age.

For the top of the cabinet, I used a Stampers Anonymous Bat Web Etcetera Thickboard Trim ETC014 cut to fit the width of the cabinet.  This was covered with a piece of embossed mixed media cardstock.  I used the Mini Botanical 3D texture fade 665631 to emboss this.  Distress Paint was used to color it.  A skull from the Skull & Spiders Adornment pkg TH94161 was adhered in the middle.  A bit of Grave Texture paste added to it to make it look like it was carved into the back.  This was painted also.  

Moss glued to the top before a pumpkin TH94169 was added.  A Tiny Vial TH93201with cut up pieces of the Halloween Confections TH94170 inside.  A Halloween Snippet label added.  My sign is one of the Halloween Word Plaques TH94164.  The recessed area was filled in with Halloween Distress Grave Texture paste.  I cut two bones in half and stuck them through the holes and glued the other ends behind the sign.  This was adhered to the top also.

Here's a photo with the lights on of the top shelf.

Here's the lantern lit up.

This is what the candle looks like lit up.

Here's another look at my finished cabinet.  Hope you enjoyed my tutorial!

Thanks for visiting, and I hope to post my last Idea-ology project before Halloween!

Until next time,

Jan

7