APOTHECARY CABINET - TIM HOLTZ IDEA-OLOGY HALLOWEEN 2023

 

Hello everyone!  I had planned to get this tutorial done a lot sooner, but I've been super busy this month.  Better late than never, I guess!  I'm sure most of you have done all your Halloween crafting, or maybe you're like me, creating until the last minute or even after!  

                               I might not explain everything in great detail, but at least I have photos to help you!

The bottom of my cabinet is made up of two large vignette boxes glued together with Distress Collage Medium. 

The top portion of the cabinet is three smaller boxes (about 3 1/4 x 4 1/2") glued together. The two sections will be glued together after I drilled the holes for the tiny lights. 

Cover the inside of the boxes with Halloween Backdrops papers. Figure out where you want your Tiny Lights to go, and drill the holes. I started in the bottom corner, made my way across the other side and up through the top to the bottom of the top three boxes. My string of lights goes across these top three also. 

Keep in mind when stringing your lights, that there are three shelves to be put in the upper cabinets.

These shelves are just made with corrugated cardboard cut to fit the depth and width of the boxes.  They are covered with wood looking paper from the Backdrops package.  They are glued in with Distress Collage Medium after I've made the Matchbox drawers for each end box, which they will rest on top of.

I've cut each Matchbox in half.  There are three sections.  These are all painted with Distress Paint.  I started with a dark brown, and then dry brushed a grey and beige paint on top.  For the drawer, I used some old Tim Holtz Remanent Rubs for the numbers and large Fasteners for the knobs.  There's a close up photo further on.

Usually I make these little books in my spare time, so handy to have them done and ready to use!  These book pieces are in the Ephemera pack.  I cut small pages from an old book.  I usually cut it wide enough to fold in half, add a few together, then staple them with my Tim Holtz Tiny Attacher. Depending how thick you want your book, glue a few sections together and then to your book cover.  Ink the edges.

For my book ends, I've added some Glow Grit Paste and Skeleton Head Stickers, book clippings to the two gravestones in the Graveyard pkg.  I've also rolled up some scrap paper and ephemera, distressed, and wrapped a book clipping around them.

For my Skulls, I've applied Crushed Olive Distress Glaze, then highlighted with Gilded Foundry Wax.

I've broken a few bones in half, inked and glued them into a drawer.  The Mummy Cloth under the skull is saturated with Glow Grit Paste.  I have a photo further down. I've also kept the lights quite loose, so they can be adjusted as I'm filling up my shelves.

All my vials have been painted first with Distress Collage Medium (this helps prepare the glass surface), then Rock Candy Crackle Paint applied after the medium was dry.   Labels and book clippings were also applied.  Brown Distress Crayon  was applied in the cracks.  I've painted the insides with paint and added in some Glow Grit Paste in some of them.  Keep in mind that there will be a window in front, so make your bottles a bit brighter, so they show up better.

Two windows from the Baseboard layers pkg. are used for my cabinet.  The Shattered Window pieces are adhered behind.  For the top centre window, an extra baseboard piece was added.  I've added a Skull Tag to the middle with Glow Grit Paste.

To make the Shattered Glass look dusty or dirty, I've rubbed a very small amount of Collage Medium with my finger on them.  If you want any section left clear, you can rub it off with a damp cloth or finger as I have done in the middle of the one pane.  I've adhered the windows to the cabinet at the very end of my project.  All my shelves were finished and the tiny lights were placed first.

For the middle window, I've used one of the Etcetera Facades (2nd from the left), which fit perfectly behind the window and was enough for the extra baseboard arch piece to fit on.

Here, you can see the Facade from the back.  I've just painted the back with Distress paint.

I've used two owls from the Ephemera pkg. and adhered them both on top of a glass bubble with Glow Grit Paste.  The tall one is adhered with Glow Paste on top of a piece of foam, which was painted and Grit paste added.  The shorter one is adhered onto a small round ephemera label.

These two owls are placed in the bottom shelf. I've kept them close to the edge, as a window will be in front, and they will show up better.  Another larger Owl label is placed right on the middle of where the two boxes join.  I've cut some of the background away at the top and just left a narrow piece where the wood edges are.  There's a photo later on, that it shows up in.

A mini Display Dome has some Ephemera and acrylic bats inside.  Glow Grit Paste on the bottom. The glass also has some Collage Medium on it to dull the glass.  There's also Sticker bats adhered to the tiny lights.

On this shelf, I have used the framed portrait from the Sticker Book, Drippy Candles (with added drips from my glue gun) on the candlesticks from the Manor Pkg.  A spider adornment, and a wizard's staff or wand (not sure what you would call it, lol).  It was made with a glass bubble(tinted with alcohol ink) and a cotton ball, I have explained further down with my twisted twigs.

These Trick or Treat Pumpkins were my favourite from this release!  This cat one is filled with twisted branches and whispy Glowing Cotton (explained below), Leaf adornment was tinted with Foundry Wax and paint.  Another Mini Display Dome, with bones inside, a bit of fabric wrapped around the bottom, and another spider adornment and mummy cloth. 

I created these twisted twigs with a Cotton Ball, Collage Medium and Mica Stains.  Just tear off a piece from your cotton ball, saturate with Collage Medium and twist it!  Easy!  After it has dried, then colour with Mica Stain or anything you choose.

Here's some other ones, I created for another project.  My mummy cloth used in this project also had Collage Medium applied, then Glow Grit Paste.  Just clip parts of the cloth so it's ragged, it will still be pliable after it has dried.  I've also unrolled part of the cotton ball and applied my Glow Grit Paste to this too.  Makes for some interesting shapes!  For the Wizard wand, I just twisted the staff like I did with the twigs, but thicker, especially at the top, made an indentation, and glued a glass bauble on the end after I coloured it.

In this section, I've got another vial, with a label, a bone (broken in half) and mummy cloth with Glow Grit Paste.  Here's the close up of the drawers after they were painted, and remnant rubs and fasteners added.  Inside the open drawer, I have mummy cloth, with some Confectionary candies.

A lock and key from the Gothic Gates was added with a small chain, to the middle window pane (or I should say glass cupboard doors!) This was  distressed with paint and Foundry Wax too.

Here's another close up of these two top shelves.  Once you have your shelves all filled and glued down, the shattered glass frames can be adhered on to the front middle.

Here you can see the label with the owl.  I've cut some of the top part surrounding the owl off, except that middle strip. It covers the box edges.  I did this, as I wanted more to show up behind the owl.  A word Plaque was added at the bottom of this frame.

The back and sides of my cabinet was covered with Halloween Backdrops paper.  One continuous sheet of paper across the top part and another across the bottom, to cover the boxes.  I've also added some Distress Opaque Crackle paste in random areas.  This was coloured with Distress Crayon and Ink.  I made a little pocket for my battery pack from a piece of Halloween Ephemera.

Here's a few photos of the shelves lit up.  The Glow Grit Paste adds in an extra green glow to the lights.  I've used Green Tiny Lights here. 

Here's another look at my finished Apothecary Cabinet!

Thanks so much for visiting me here, and I hope you have had a great Halloween creating and making  season!  

Until next time,

Jan

Supply List

TH94325 Shattered Windows

TH94345 Mini Display Domes

TH94342 Spiders and Branches Adornments

TH94340 The Manor (candlesticks)

TH94341 Word Plaques &Tags

Th94339 Skulls & Bones

TH4338 Trick or Treat (pumpkin)

TH94337 Graveyard

TH94336 Halloween Confections

TH94335 Halloween Sticker Book

TH94333 Halloween Layers & Paper dolls

TH94332 Halloween Ephemera Pack

TH4334 Baseboards & Transparencies

TH94331 Halloween Backdrops

TH94343 Gothic Gates (key & lock)

TH94155 Mummy Cloth

TH93201 Corked Tiny Vials

TH92899 Corked Vials

TH94050 Match Boxes

TH94314 Large Fasteners

TH94157 Halloween Tiny Lights

TH93279 Vignette Boxes

ETC016 Etcetera Facades

TH94260 Drippy Candles

TH94180 Glass Bubbles

Ranger Ink Supplies - Distress Inks, Mica Stains, Crayons, Collage Medium, Grit Glow Paste, Paint, Foundry Wax, Alcohol Ink, Opaque Crackle Paste

3

MYRON TOMBSTONE - TIM HOLTZ SIZZIX HALLOWEEN 2022

Hello everyone!  I’m sharing another project created for the Tim Holtz Sizzix Halloween 2022 release.  Colorize animal Thinlits are so fun to create with and Myron the frog is a great addition to the collection!

 Myron comes with a cute mushroom too, of course I couldn’t stop at one!  Sizzix has step by step YouTube videos on their Colorize Hub Section for every Colorize die set, which I highly recommend watching. 

I wanted my tombstone to look like it was carved stone, so I  used the Acorns 3D Embossing Folder  on the textured side of Distress Water-colour cardstock.  I decided to use the circle embossing plate from the  Embossing Diffuser Set#1 to eliminate any embossing in the centre, so I could add in my letters.  This plate replaces a cutting/embossing plate.

The embossing will only occur around the open circle. 

               I've used a mini Etcetera Halloween Tombstone tag(approx. 4 1/2 x 8") from Stampers Anonymous for my base.  This set is the tag, plus a top and bottom add-on.

To colour my tag, I lightly sprayed with Distress Oxide and Distress sprays. I like to give my cardstock a bit of colour before embossing, and then after, adding a small amount so it gathers into the grooves, highlighting the embossed areas. I tried to keep it lighter in the middle, using Antique Linen, Frayed Burlap, and Walnut Stain(I think) near the edges. My embossed cardstock was adhered to the tag, It's slightly shorter in length, but the top and bottom will be covered by the tombstone add-ons.

Using the Alphanumeric Thin set, I die-cut the words, In Memory Of.  This was from coloured Distress cardstock, similar to the tombstone.  I’ve added a small amount of Distress Grit Paste around and over some of the letters. When I applied the grit paste, colour from my Distress sprayed paper seeped through to the paste. I didn’t mind this, as it gives my tombstone a more aged look. If you don’t want any seepage in between layers of your mixed media project, I would recommend applying a small amount of Distress Micro Glaze on your bottom layer.  This glaze is a water resistant sealer, so it will stop the colour seeping into your glaze.  

I did the same embossing with a diffuser on a small piece for the top piece of my tombstone. This time I used the oval diffuser plate.

There is a border that goes on top.  This I painted with Distress paint (Frayed Burlap) and  it will be adhered to the top of my tag. 

The bottom piece was also painted. Grit Paste was applied in the corner and on the frame.  I had used last year's Halloween Grit Paste (I actually had some left!) but this year's Cr ypt paste would have the same effect, slightly different colour with a black fleck (TSHK81081) or even the Translucent Grit Paste (TDA71730).  I tinted it in areas with a very small amount brown Distress paint and a lightly touch of Antique linen across the raised areas.  The Grit paste was also applied the same way to my bottom piece.

An Idea-ology Deco Frame Adornment (a bit of dark Alcohol Ink applied in areas)was adhered (with Collage Medium) with a Halloween Remnant Rub inside the frame(TH94268).  Grit Paste was also applied around the frame.

 

Once you have the top and bottom pieces adhered, I hot glued dried moss along the edges.

I used the Kraft Stock Cool Stack paper(TH94110) which is greens and earthy colours, and Black for Myron. This was sanded lightly. The mushrooms were from Distress Heavystock that was coloured with Distress Sprays and Oxides. For added interest, I applied some Translucent Grit Paste to Myron's belly with an older Tim Holtz stencil (Dot Fade THS006), slightly tinted with a very small amount of green Distress spray or ink. It's a bit tricky to apply, but you can wipe away or scrap off any excess in areas you don't want it. Let this dry. After I had my Myron Frog and Mushrooms assembled, these were adhered to my tag (foam adhesive squares for dimension) and moss also tucked in everywhere. 

A Halloween Remanent Rub (dearly departed and a decorative scroll from an old set) was applied to the bottom piece.  You are done!

If you missed Tim's YouTube Sizzix Halloween video, it  can be watched here!

Hope you enjoyed this brief tutorial and happy Halloween creating!

Until next time,

Jan

Supplies

THETCH012 Mini Tombstone Etcetera Tag -Stampers Anonymous

Acorns 3D Embossing Folder

Embossing Diffuser Set #1 657945

Myron Colorize Thinlits Die Set

Alphanumeric Thin Thinlits set 662226

Dot Fade Stencil THS006

Kraft Stock Cool Stack TH94110

Distress Water-colour and Heavystock Cardstock

Frayed Burlap, Antique Linen Distress Paint

Distress Sprays and Oxide Sprays (to colour mushrooms & Tombstone background)

Crypt Grit Paste TSHK81081

Translucent Grit Paste TDA71730

Halloween Remnant Rubs TH94268

Adornment Deco Frames TH93792

Dried Moss from Craft Store

Foam Dimensional Adhesive Squares

2